bluemacaw paint
PRODUCT PARAMETERS
- Main Ingredient: crylic acid and resin
- Volume: 1L/4L
- Weight:0.93/3.6KG
- Product Type: Paints and coatings
- Paint Type: Finish Coat
- Main Colors: Available in a variety of colours, mainly pure colour
- Suitable For:Specially designed for automotive surfaces
- Features: Authentic, high-quality pigments are used to deliver vibrant, long-lasting colors
- Use Alerts: Non-food products should not be eaten
- Storage State: Room temperature
- Storage Location:Store in a dry place, away from direct sunlight and away from heat sources
- Technical Support: Provide professional technical guidance and construction advice
Description
Characteristics: The body repair paint of medium and high-end cars has a hard paint film, strong protection and coverage, bright and durable colors, low cost and excellent performance.
Application: Polished, completely dried old lacquer layer and painted surfsace in the blue macaw series, etc.
Product name | 2K Solid Color Basecoat |
Main contents | Acrylics and resins |
Color description | Available in a variety of colours, mainly solid colour |
Actual weight | 0.93KG/3.6KG |
Packing cans | 1L/4L |
Packing cartons | 1L*12/4L*4 |
carton size (L*W*H) | 1L*12 (carton size: 45*35*15cm) /4L*4 (carton size: 35*35*20cm) |
Solids content | ≥70% |
mixing ratio | 2K Solid Color Basecoat:thinner:hardener= 2:1:0.5-0.8 |
Spraying method | Spray 2 to 3 layers,40-60μm,the flash-off time is 5 to 10 minutes |
Surface drying time | 40min at 25ºC |
Storage conditions | Place in a cool, dry place at about 20 ℃ |
Weather Resistance | 2 years |
Scope of application | Car repair, industrial machinery coating, advertising signs, metal surface treatment, building exterior wall, wood coating, plastic products coating, etc |
Notice:
- Before spraying, the primer film must be polished and cleaned (wet grinding 600#-800#, dry grinding 400#-600#);
- In winter, when the temperature is lower than 15 °C, it is not recommended to take the self-drying method, and it is best to use the baking room to raise the temperature to about 60 °C;
- In the case of temperature higher than 30 °C, the diluent should be added with an appropriate amount of white water, and the specific addition method is described in the instructions for the use of white water;
- 4: If there is a fisheye found in the spraying process, the construction should be stopped immediately, and 0.5-1% anti-beading water should be added to the remaining paint before spraying;
- At the interface of the old and new paint film, the barge can be sprayed directly to achieve the perfect effect of the barge, see the instructions for the use of the barge
- The topcoat with supercuring agent should be used up as soon as possible, and should not be saved for reuse;
- After use, please clean all spraying tools with thinner immediately, otherwise it will be difficult to remove the curing;
- If there are small particles and sagging places after spraying, they can be polished with 1200#-2000# sandpaper after full curing;
- Storage period / packaging specifications: placed in a cool and dry place / 20 °C, the original cover can be stored for two years, 1L or 4L canned.
FAQs
We have a full set of automotive refinish paints, providing one-stop service, the main products are 1K pure color paint, 1K silver powder series, 1K pearl series, 2K pure color paint, primer has 1K primer surface, 1K plastic primer, 2K intermediate primer, 2K epoxy primer, a full range of varnishes, curing agents, thinners and various accessories.
Yes, our products comply with international standards, such as ISO 9001 quality management system certification, ISO 14001 environmental management system certification, etc. We are committed to providing our customers with high-quality coating products.
Our ODM services include comprehensive capabilities from concept design, formulation development to finished product production. The design team has rich industry experience and is able to create innovative products that meet the needs of the market.
We provide a full range of OEM services from raw material procurement, manufacturing to quality control. Ensure product quality through a strict quality management system, including raw material inspection, production process control and final product testing. At the same time, we welcome customers to participate in quality audits and product testing.
- Customers express their interest and make inquiries via email or online platforms. The factory then provides a detailed quotation, including product specifications and prices.
- Once the customer confirms the sample and places the order, both parties sign the contract and clarify the terms of the transaction. After the customer pays the deposit, the factory arranges the production and carries out strict quality control. After the production is completed, the goods are inspected and packed according to the customer’s requirements.
- According to the terms of the contract, the factory arranges the shipment of the goods and dispatches the goods after the customer pays the balance. At the same time, provide the necessary export documents and shipping notices. After the goods are dispatched, the factory provides tracking services to ensure that customers know the status of the goods.
- Finally, the factory provides after-sales service and technical support to ensure customer satisfaction. The whole process requires close customer communication and strict internal management to ensure the smooth execution of foreign trade orders.
Yes,Whether it’s OEM or ODM cooperation, we recognize the importance of samples, which are essential to evaluate product quality, performance, and appearance. We will ensure that the samples are made to reflect the quality and characteristics of the final product.
- Requirement confirmation: communicate with customers to clarify the specifications and requirements of samples.
- Sample Making: Design and manufacture of samples according to confirmed needs.
- Customer Evaluation: Send samples to customers for evaluation and testing.
- Feedback & Modifications: Make necessary modifications and optimizations based on customer feedback.
Samples may involve additional costs, depending on the complexity of the sample and the cost of fabrication. We will clarify these costs with the client at the beginning of the project and make samples on the basis of mutual agreement.